Portbid Pty Limited is a limited by shares, Australian proprietary company. This corporation was registered on 1991-02-15 and was issued with the 050983483 ACN. Its Australian Business Number is 58050983483. Since 2014-09-13, the company is headquartered in NSW, post code 2147. The previous headquarters were located in NSW 2147 (from 2010-09-07 to 2014-09-13), NSW 2154 (from 2005-02-21 to 2010-09-07), and NSW 2765 (from 2000-03-15 to 2005-02-21). Portbid Pty Limited was registered for the GST on 2000-07-01. Portbid Pty Limited has been using the Gng Sales trading name since 2008-11-03 (it should be noted that the Australian Business Register no longer collects or updates trading names). In total the company used 2 trading names. The company has also used 6 business names, namely Trade Zone Direct from 2014-05-14 to 2017-10-02, Rupes Power Tools Australia from 2006-09-18. The above data comes from the ABN database which was updated on 2017-10-02. AUBiz found 1 trademark that mention this company. Trademark number 671428 was filed on 1995-09-04 and is categorised as "fancy" (application status: "registered, live").
Status | From | To |
---|---|---|
Active | March 15, 2000 | current |
Name | From | To |
---|---|---|
Portbid Pty. Limited | June 2, 2000 | current |
Portbid Pty Ltd | March 15, 2000 | June 2, 2000 |
Name | From | To |
---|---|---|
Trade Zone Direct | May 14, 2014 | October 2, 2017 |
Rupes Power Tools Australia | September 18, 2006 | current |
Star Spray Guns | March 15, 2000 | current |
Work Quip | March 15, 2000 | current |
Dts Direct Trade Supplies | March 15, 2000 | current |
G.n.g. Sales | March 15, 2000 | current |
Name | From | To |
---|---|---|
Gng Sales | November 3, 2008 | current |
Portbid Pty Ltd | March 15, 2000 | November 3, 2008 |
Location | From | To |
---|---|---|
NSW 2147 | September 13, 2014 | current |
NSW 2147 | September 7, 2010 | September 13, 2014 |
NSW 2154 | February 21, 2005 | September 7, 2010 |
NSW 2765 | March 15, 2000 | February 21, 2005 |
Status | From | To |
---|---|---|
Registered | July 1, 2000 | current |
Advertisements
Status | registered |
Registration date | May 14, 2014 |
Renewal date | May 14, 2017 |
Address for service of documents | 7 9A Foundry Rd Seven Hills NSW 2147 |
Principal place of business | 7 9A Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Status | registered |
Registration date | September 18, 2006 |
Renewal date | September 18, 2018 |
Address for service of documents | 3 Foundry Rd Seven Hills NSW 2147 |
Principal place of business | 3 Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | BN98244452 |
Former state territory | NSW |
Status | registered |
Registration date | November 14, 1996 |
Renewal date | November 14, 2014 |
Address for service of documents | 3 Foundry Rd Seven Hills NSW 2147 |
Principal place of business | 3 Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | T7052112 |
Former state territory | NSW |
Status | registered |
Registration date | July 26, 1996 |
Renewal date | July 26, 2017 |
Principal place of business | 3 Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | T4910744 |
Former state territory | NSW |
Status | registered |
Registration date | November 3, 1993 |
Renewal date | November 3, 2017 |
Principal place of business | 3 Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | Q6197335 |
Former state territory | NSW |
Status | registered |
Registration date | October 21, 1991 |
Renewal date | October 21, 2018 |
Address for service of documents | 3 Foundry Rd Seven Hills NSW 2147 |
Principal place of business | 3 Foundry Rd Seven Hills NSW 2147 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | M3375140 |
Former state territory | NSW |
Status | Cancelled |
Registration date | November 14, 1996 |
Renewal date | November 14, 1999 |
Cancelled date | August 22, 1997 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | T7052210 |
Former state territory | NSW |
Status | Cancelled |
Registration date | March 23, 1990 |
Renewal date | March 23, 1996 |
Cancelled date | August 4, 1996 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | L4873122 |
Former state territory | NSW |
Advertisements
Application date: | September 4, 1995 |
Lodgement date: | September 4, 1995 |
Registered date: | September 4, 1995 |
Live or dead: | Live |
CPI status: | Registered |
Status: | Registered/Protected - Renewal Due |
Mark code: | Trade Mark |
Trademark type: | Fancy |
Acceptance due date: | August 27, 1996 |
Sealing due date: | December 31, 1996 |
Registered from date: | September 4, 1995 |
Sealing date: | December 31, 1996 |
Renewal due date: | September 4, 2015 |
Court orders: | No |
Revocation of the acceptance: | No |
Goods and services assistance: | No |
Lodgement type: | National |
Descriptive: | Workquip Quality Tools |
Examination report number: | 1 |
Examination class count: | 1 |
NICE class code: | 8 |
NICE occ number: | 1 |
NICE description text: | Heavy Duty And Industrial Tools |
Suburb name: | Castle Hill |
Postcode: | 2154 |
Australian state code: | NSW |
Country code: | AU |
General information:
Patent status: |
Lapsed Either the application has not been accepted by 21 months after the first examination report (or 12 months after the Raising the Bar Act) or some other deadline in the prosecution process has not been completed in time, for example IP Australia has issued a direction to file a request for examination and the applicant has not done so in the required period (2 months). |
Patent type: | STANDARD |
International Patent Classification:
IPC Mark: | B05C 5/00 |
Section code: | B - performing operationstransporting |
Class code: | 5 - spraying or atomising in general; applying liquids or other fluent materials to surfaces, in general |
Subclass code: | C - apparatus for applying liquids or other fluent materials to surfaces, in general (spraying apparatus, atomising apparatus, nozzles b05b; plant for applying liquids or other fluent materials to objects by electrostatic spraying b05b0005080000) |
Main group code: | 5 - apparatus in which liquid or other fluent material is projected, poured or allowed to flow on to the surface of the work (b05c0007000000, b05c0019000000 take precedence);; |
IP Australia process information:
Expiry date: | July 8, 2025 |
Contains public sector information licensed under the Creative Commons Attribution 3.0 Australia licence. Material on this website was obtained from publicly-accessible databases and is attributed to ©Commonwealth of Australia 2024 (http://data.gov.au, http://acnc.gov.au/ and http://abr.business.gov.au/), ©Intellectual Property Government Open Data 2024, ©ASIC - Company Register. While we try to make the information as precise and up-to-date as possible, we are aware the datasets are not always error-free. Aubiz.net will not take responsibility for any errors in the databases. The material provided should be treated as a starting point of more in-depth research, not as fact.